How To Install Konica Print Drivers for MacOS

This guide is intended to help Mac users waste time by installing Konica print drivers manually. An easier and faster option is to use the Konica Auto Installer but if you insist see below.

Again the Konica Auto Installer performs each step automatically with one click.

How to steps

  1. Download the print drivers directly from Konica's website. If the Konica website is unavailable, you can download the latest Konica print drivers here.
  2. Extract the print drivers.
  3. Install the print drivers and create the print queue.

Step 1. Download OEM Print Drivers

Go to enter your Model Number and click search.

Click on your Operating System and download the driver

Other Drivers

The recommended driver is the model specific PCL driver. The other drivers listed might be a better fit depending on what you're printing.

Step 2. Extract the Print Drivers and install the Package file

  1. Go to your Downloads folder, open the DMG file, run the Package file (You'll need the admin password to the computer).


The Konica Auto Installer does all of this with one click.

Step 3. Goto System Preferences & Create Print Queue

Go to System Preferences and click on Printers & Scanners.

Click on the + to create the print queue.

Select IP enter Address, Protocol Line Printer Daemon - LPD, enter print for Queue, enter a Name and select a model.


The Konica Auto Installer does this with 1 click.

It takes about 5 minutes for an above average user to install 1 print driver. Save yourself some time and just use the Konica Auto Installer.

Time Remain:


Whats my IP Address?

Go to the Home Screen and click on Utility.

Click on Administrator Shortcut Settings.

Enter the admin password. Its either 1234567812345678 or 0We@ATO.

Click on the Network Settings

Click on the TCP/IP Settings

Click on the IPv4 Settings

Set to Manual Input and change the IP Address

Change default print settings

Open up a web browser and goto http://localhost:631/printers

If you get the following message, open up Terminal and type the cupsctl WebInterface=yes command.

Updated on July 20, 2020

Was this article helpful?

Related Articles

Not the solution you were looking for?
Don’t worry we’re here to help!
Submit a Help Ticket